Cypress Semiconductor NoBL CY7C1472V33 Guía de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 57
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
ZestSC1 User Guide
CONFIDENTIAL Page 15 of 57
reversing the data flow, select a large value (256 or greater). For applications which
alternate transferring short blocks in either direction, select a short value (such as 16).
User_StreamDataIn is the data stream from the host to the FPGA. The active high
User_StreamDataInWE signal indicates when the data is valid. If the user application
sets User_StreamDataInBusy high then the host will be blocked and no data will be sent
to the user application.
User_StreamDataOut is the data stream from the FPGA to the host. The
User_StreamDataOutWE signal should be set high in the same cycle as the valid data. If
the User_StreamDataOutBusy signal is high then the user application should not attempt
to transfer any more data. The core contains a short FIFO which can accept 4 transfers
after User_StreamDataOutBusy goes high allowing time for the user application to
respond.
Figure 4. Host to FPGA Streaming Cycles
Figure 5. FPGA to Host Streaming Cycles
USER CL
K
USER StreamDataOut
USER StreamDataOutBus
y
D0
USER StreamDataOutWE
D2 D1
USER CL
K
USER StreamDataIn
USER StreamDataInBus
y
D0
USER StreamDataInWE
D2 D1
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 56 57

Comentarios a estos manuales

Sin comentarios