Cypress Semiconductor CY8C24894 Manual de usuario descargar pdf (Pagina 49)

CY3240 USB-I2C Bridge Guide, Doc. # 001-66660 Rev.*B 49

Code Examples

35.Open the existing main.c file in Workspace Explorer. Replace the existing main.c content with the

content of the embedded Example_My_First_PSoC_Project_Main.c file, which is attached to this

document.

Figure 5-30. Workspace Explorer Window

36.Save the project.

37.To build the project, click Build >Generate/Build 'Example_My_First_PSoC_Project'.

38.Connect the CY3240 demo board to the PC through a MiniProg1 and program the board.

39.The board can be programmed through PSoC Designer IDE or by launching PSoC Programmer.

Note To program the board using PSoC Programmer, see PSoC Programmer on page 14.

40.To program the board through PSoC Designer follows these steps.

a. Click on Program > Program Part.

Note When programming the board through PSoC Designer, close any open instance of PSoC

Programmer.

b. In the Program Part window, set the following:

- In Port Selection drop-down box, select MiniProg1/<MIniProg_Number>; ensure it is Con-

nected.

- Acquire Mode: Power Cycle

- Verification: Off

- Power Settings: 5.0 V

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 63 64

Sin comentarios

Cypress Semiconductor CY8C24894 Manual de usuario Pagina 49