Cypress Semiconductor CY8C24894 Manual de usuario descargar pdf (Pagina 38)

38 CY3240 USB-I2C Bridge Guide, Doc. # 001-66660 Rev.*B

Code Examples

12.In this folder, right-click on ADC10 and select Place. The user module (UM) is placed, as shown

in the following figure.

Figure 5-6. Default ADC User Module Placement

13.The ADC UM is placed in ACE00 and ASE10 of the analog block. Click on Next Allowable

Placement (Figure 5-7) to change the ADC module from ACE00 to ACE01. Click on the Place

User Module icon (Figure 5-7). Similarly, change the ADC module in the digital block from

DBB00 to DCB02, as shown in Figure 5-8.

Figure 5-7. PSoC Designer Toolbar

Figure 5-8. ADC10 User Module Placement

Note A temperature-sensitive voltage, derived from bandgap sensing on the die, is buffered and

available as an analog input into the continuous time block ACE01. So, the ADC module place-

ment is changed to ACE01 block.

Place User Module

Next Allowed Placement

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

Sin comentarios

Cypress Semiconductor CY8C24894 Manual de usuario Pagina 38