Cypress Semiconductor CY7C1515JV18 Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 27
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
CY7C1511JV18, CY7C1526JV18
CY7C1513JV18, CY7C1515JV18
Document Number: 001-12560 Rev. *C Page 12 of 27
Write Cycle Descriptions
The write cycle description table for CY7C1515JV18 follows.
[2, 10]
BWS
0
BWS
1
BWS
2
BWS
3
K K Comments
LLLLLHDuring the Data portion of a write sequence, all four bytes (D
[35:0]
) are written into
the device.
LLLLLHDuring the Data portion of a write sequence, all four bytes (D
[35:0]
) are written into
the device.
L H H H L–H During the Data portion of a write sequence, only the lower byte (D
[8:0]
) is written
into the device. D
[35:9]
remains unaltered.
L H H H L–H During the Data portion of a write sequence, only the lower byte (D
[8:0]
) is written
into the device. D
[35:9]
remains unaltered.
H L H H L–H During the Data portion of a write sequence, only the byte (D
[17:9]
) is written into
the device. D
[8:0]
and D
[35:18]
remains unaltered.
H L H H L–H During the Data portion of a write sequence, only the byte (D
[17:9]
) is written into
the device. D
[8:0]
and D
[35:18]
remains unaltered.
H H L H L–H During the Data portion of a write sequence, only the byte (D
[26:18]
) is written into
the device. D
[17:0]
and D
[35:27]
remains unaltered.
H H L H L–H During the Data portion of a write sequence, only the byte (D
[26:18]
) is written into
the device. D
[17:0]
and D
[35:27]
remains unaltered.
H H H L L–H During the Data portion of a write sequence, only the byte (D
[35:27]
) is written into
the device. D
[26:0]
remains unaltered.
H H H L L–H During the Data portion of a write sequence, only the byte (D
[35:27]
) is written into
the device. D
[26:0]
remains unaltered.
HHHHLHNo data is written into the device during this portion of a write operation.
HHHHLHNo data is written into the device during this portion of a write operation.
[+] Feedback
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Comentarios a estos manuales

Sin comentarios