Cypress Semiconductor CY8C24894 Manual de usuario descargar pdf (Pagina 17)

CY3240-I2USB I2C-USB Bridge Guide, Doc. # 001-66660 Rev.** 17

Kit Operation

Figure 3-4. ISSP Programming Header

3.3 Connect Demonstration Board to Bridge

1. Connect I2C slave demonstration board to bridge, as shown in Figure 3-5.

Figure 3-5. Demonstration Board and Bridge Connection

2. Select +5V as power supply to the board from Bridge Control Panel. The LED (red) on the bridge

board lights up, as shown.

Figure 3-6. LED (Red) on the Bridge Board

3. Click List; the bridge will find I2C slave demonstration board at 0x00 address.

3.3.1 Run Demonstration Board Test

The demonstration board has built-in temperature sensor and photodiode. The measurement results

of these are sent over I

1. Open the Variable Setting dialog box from the Chart menu.

[+] Feedback

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

Sin comentarios

Cypress Semiconductor CY8C24894 Manual de usuario Pagina 17