Cypress Semiconductor CY8C24094 Especificaciones Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 90
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
48 CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B
Code Examples
- Port Selection: select MiniProg1/<MiniProg Number> with the status Connected
- Acquire Mode: Power Cycle
- Verification: Off
- Power Settings: 5.0 V
c. Click on the Program button to start programming the board.
d. The programming starts and the status is displayed on the progress bar.
Figure 5-31. Programming Status
e. When the programming is done successfully, the 'Operation Succeeded!' Message is shown.
Figure 5-32. 'Operation Succeeded!' Message
5.1.4 Verify Output
1. Make the following connections on the board using the single strand jumper wires provided.
a. Connect 2-KΩ resistor between Port P0.5 (P05 on J4) and P1.5 (P15 on J9).
b. Connect LED1 to Port P3.1 (P31 on J10) and LED2 to P3.2(P32 on J10).
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 89 90

Comentarios a estos manuales

Sin comentarios